ABSTRACT
The COVID-19 pandemic created significant challenges in operating the lab component of undergraduate courses and promoting active learning, with only a short time available to implement alternative teaching methods. In this work a low-cost platform for distance operation and assessment of replaceable bench-scale heat exchangers was developed to provide students an opportunity to observe the transient and steady-state behavior of heat exchangers while unable to access lab facilities. Each workbench had a new material cost of approximately C$5 000. Operation of physical equipment provided students the opportunity to observe non-ideal behavior and compare various heat transfer correlations which may not be seen in process simulators. The developed platform implemented an Arduino microcontroller for low-cost process control. Equipment was seamlessly slotted in to the existing course upon the return to on-campus learning and provided a more stable system when compared to previously existing lab experiments. Most learning outcomes were observed in remote and in-lab experiments and challenges faced in remote operation are highlighted. No statistically significant difference was observed in student performance between students completing lab experiments remotely and students completing experiments in-lab. © 2023 Institution of Chemical Engineers
ABSTRACT
The generation of personal protective equipment (PPE) waste due to the impact of COVID has increased multi-fold globally. In this study, pyrolysis of polyolefin-based PPEs was carried out using a bench-scale reactor of 2 kg per batch capacity. Thermogravimetric (TGA) analysis of face masks was carried out to identify the optimal parameters for the pyrolysis process. Different combinations of catalysts (ZSM-5 and montmorillonite), catalyst to feed ratio (2.5% and 5%), experiment duration (2 h and 3 h), and process temperature (450 degrees C and 510 degrees C) were tested to determine the maximum yield of the pyrolysis oil. The oil and char obtained from the pyrolysis of PPEs were analyzed for its gross calorific value (GCV), elemental analysis (CHNS), and chemical composition. Based on the experiments conducted, the optimum pyrolysis temperature, catalyst, catalyst to feed ratio, and batch time for maximum oil yield (55.9% w/w) were determined to be 510 degrees C, ZSM-5, 5%, and 2 hours, respectively. Oil was free of sulfur and had a calorific value of 43.7 MJ/kg, which is comparable to commercial diesel fuel and makes it a suitable alternative fuel for ships, boilers, and furnaces.